| RPM | Model dependent, see model specifications |
| MOUNTING | Standard mounting with set screws onto shaft, optional flange mounting (Click here for installation and best practices video.) |
| HOUSING MATERIAL | 304 Stainless steel, or rust-proof black oxide coated steel |
| TERMINATIONS | Ring terminals, flying leads, MIL-spec, or wet-mate connectors on rotor or stator |
| OPERATION | Can be operated in any direction or orientation |
| MAINTENANCE | Features permanently lubricated bearings at both ends, brush-free design requires no user maintenance |
| VOLTAGE | Standard: Up to 600V AC/DC, Optional: Up to 5,000V AC/DC |
| MINIMUM INSULATION RESISTANCE | >500MΩ @ 1kVDC |
| AMPERAGE | Model dependent, up to 35A/channel (channels can be bridged in parallel, for higher capacity) |
| FREQUENCY | Up to 1GHz (Application dependent) |
| DATA & SIGNAL TRANSMISSION | Ethernet (10/100/1000Mbps), Etherlink, LAPPNET, Profinet, Profibus, ControlNet, DeviceNet, CAN-Bus, RS485, RS432, RS422, USB (1.0/2.0), Modbus, EtherCAT, CC-Link, coax, thermocouple (all types) and all other major communication protocols (With an appropriate number of circuits and cables) |
| STATIONARY CONTACT RESISTANCE | <0.1mΩ |
| ROTATING CONTACT RESISTANCE | Same as stationary contact resistance (<0.1mΩ) |
| ELECTRICAL NOISE | <0.01uV |
| OPERATION | Intrinsically immune to internal arcing |
| AMBIENT TEMPERATURE | Not to exceed 160˚F (70˚C) |
| IP RATING | Available up to IP67 |
Through-Hole Mounting
| ROTOR | Ring Terminals Drum (Standard), Flying Leads |
| BODY | Ring Terminals (Standard), Potted Leads, Potted Connector |
| RPM | Up to 15,000 RPM |
| MOUNTING | Through-hole, end of shaft, or flange mount available |
| HOUSING | 6061 Aluminum or 304 Stainless steel |
| PASSAGES | Up to 20 Passages |
| PRESSURE | Up to 23,000 PSI - speed and media dependent |
| TEMPERATURE | -321F to 900F, depending on options |
| FIBER TYPES | Single-mode E9/125μm Multi-mode G50/125 μm Multi-mode G62.5/125 μm *Fiber protection available |
| CHANNELS | Standard: 1, 2, 3-20 Channels Custom: Up to 81 Channels |
| CONNECTOR TYPE | SC, LC, FC, ST, LSA, Molex/LC, LuxCis |
| POLISH | UPC, APC, PC |
| DIGITAL DATA TRANSMISSION | Up to 40Gbits/s per channel |
| RPM | Up to 3,000 RPM (Model specific) |
| TEMPERATURE | -40F to 185F |